Table 5 Recovery ratio and moisture content according to condition of spray drying
| Condition 11) | Condition 22) | Condition 33) | Condition 44) |
| Recovery ratio (%) | 34.01±1.055),a | 22.31±1.12b | 25.61±0.95c | 27.70±1.03d |
| Moisture (%) | 9.11±1.05a | 9.33±1.22a | 9.66±2.52a | 9.44±1.30a |
Inlet temperature 180°C, Atomizing pressure 180 kPa, Blow power 0.50 m3/min, Feeding rate 500 mL/h.
Inlet temperature 180°C, Atomizing pressure 240 kPa, Blow power 0.50 m3/min, Feeding rate 500 mL/h.
Inlet temperature 200°C, Atomizing pressure 240 kPa, Blow power 0.50 m3/min, Feeding rate 500 mL/h.
Inlet temperature 200°C, Atomizing pressure 180 kPa, Blow power 0.50 m3/min, Feeding rate 500 mL/h.
Means±SD with different superscripts in the same raws are significantly different (p<0.05).